USB-DA10

10-Port USB Data Acquisition Module

Send Enquiry
Category: Tag:

This product has been discontinued.

Description

TITAN’s USB-DA10 is a low-cost 10-port data acquisition module for the USB port, which allows for an easy way to link from USB ports on computers for measuring voltage, controlling and monitoring process, and acquiring temperature data. Each of the ten available ports can be configured as digital or analog modes; ports six to ten can also be configured to measure temperature via single-byte commands.

USB-DA10 is powered by the USB port of the host PC (5V, 500mA), and can provide an output power of 5VDC 200mA for external circuits requiring power.

Windows and Linux application programs are provided with USB-DA10 to control all available functions.

Features


  • Provides ten ports digital input/output
  • Digital output: set high, or clear to low
  • Digital input: reads high/low state
  • Provides ten ports analog input
  • Read and return the voltage on each I/O pin using a 10-bit A/D: 0 to 5 VDC range
  • Provides five ports temperature measurement input.
  • Measures temperature ranging from -55°C to 125°C (-67°F to 257°F) with a digital temperature sensor.
  • Powered by a USB port, no external power supply needed
  • USB 2.0 Full Speed, USB 1.1 compliant
  • Easy to use with single-byte commands to control all functions
  • Can utilize a simple terminal emulator to control all functions
  • Provides terminal block connector for easy connection
  • LED for power indication
  • Drivers and application program provided for Windows 10, 8.1, 8, 7, Vista, XP, 2000 and Linux.
  • CE, FCC approval

Specifications

USB Bus
ComplianceUSB 2.0 Full Speed, USB 1.1 compliant
FIFO128 byte transmit
256 byte receive
I/O Interface
InterfaceDigital input/output

Analog input

Number of Ports10
Connector7-pin terminal block × 2
Protection15kV ESD protection for all signals
General
Digital OutputSet to high

Clear to low

Digital InputRead high/low state
Analog InputRead voltage on pin with a range of 0VDC~5VDC
TemperatureDigital temperature sensor measures within a range of -55°C to 125°C (-67°F to 257°F)
Software
DriversWindows 2000 up to Windows 10
Windows Server 2000 up to 2018
Linux kernel 2.6+
Mac OS X support available
InstallationThe driver is already installed (Linux), or automatically downloading and installing device drivers after Device connection (Windows).
Power
Voltage on Digital Inputs-0.3VDC to 5.3VDC
Voltage on Analog Inputs-0.3VDC to 5.3VDC
Sink/Source Current on Each Pin25mA maximum
Environmental
Operating Temperature0°C to 55°C (32°F to 131°F)
Storage Temperature-20°C to 75°C (-4°F to 167°F)
Operating Humidity5% to 95% RH
Safety ApprovalsCE, FCC
Mechanical
Dimensions65mm × 43mm × 15mm (L × W × H)

Software


You should download the USB to Serial Driver first.

Select the file according to your operating system from the list below to get the latest USB-DA10-AP for your computer.

If you use Ubuntu, you should run the program with sudo: $tar -zxvf USB-DA10-AP-1.0.0.0.tar.gz $sudo ./USB-DA10-AP Application Guide