US-H12

Provides twelve networked USB 3.1 Gen. 1 over Ethernet device ports

Send Enquiry
Category: Tags: , , ,

Description

US-H12 Superspeed USB over IP Hub supports twelve USB 3.1 Gen. 1 ports. It is designed not only for USB ports expansion but also for extension. The Hub is featured with USB 3.1 over network sharing functionality. The USB devices inserted to this Superspeed USB over IP Hub can be shared and accessed by network computers over wired or wireless network from anyplace in the world. Each USB 3.1 port can transfer data and files at blazing speeds up to 5 Gbps – up to 10 times faster than USB 2.0. The USB 3.1 over IP Hub, when used in conjunction with TITAN’s USB server software, enables USB remote connection. The app makes all the USB ports on this Hub available to be accessed, shared and used over IP, LAN, WAN, VLAN, VPN and the Internet from any remote locations.

In case you need to forward a USB device or would like to access a remote USB device from a virtual machine, this task can be easily accomplished with USB server software. Just by installing the software onto the host machine and client, you can share USB over Ethernet and access the device in the virtual session.

Features

  • US-H12 Superspeed USB over IP Hub supports twelve USB 3.1 Gen. 1 ports
  • Empowers USB ports with USB device networking and sharing functionality
  • USB 3.1 Gen. 1 over Ethernet Device Hub allows USB devices to be accessed and shared by multiple client computers over network or across the internet
  • Network-enables remote USB peripherals and devices as if they were connected directly to the local PC
  • Supports wide variety of USB devices, i.e. printers, webcams, conference cams, cameras, fingerprint readers, scanners, barcode scanners, ID card scanners, security dongles, USB dongles, hard drives and flash drives, USB to RS-232/422/485 adapters, iPhones, iPads, Android devices and many more
  • USB plug-and-play and hot-swap functions same as onboard USB ports
  • USB ports compliant with the USB 3.1 Gen. 1 specification
  • Provides six networked USB 3.1 Gen. 1 over Ethernet device ports
  • Data rates: USB 3.1 Gen. 1 5Gbps (super speed), USB 2.0 480Mbps (high speed), USB 2.0 12Mbps (full speed) and USB 1.1 1.5Mbps (low speed)
  • User-friendly and convenient USB server software program with both server and client functionality
  • Shares your USB devices and connects remote shared USB devices over a network at the same time
  • Password authorization and traffic encryption for data security and safety
  • Any authorized users in an office next door or in another country may remotely access your USB devices through USB server app client
  • Supports standard USB webcam functions such as video transfer over a network (Internet/LAN/WAN)
  • Supports high speed isochronous USB devices
  • Able to share USB security software protection dongles conveniently using features of USB server software program
  • Redirects USB devices to virtual machines such as VMWare, Virtual PC, Citrix Xen Desktop, Microsoft Hyper-V, QEMU (KMV), etc. On a virtual machine, easy to establish a passthrough for USB devices from host OS to a guest OS
  • Multiple transaction translator (TT) architecture to each USB downstream (DS) port
  • LEDs for power and USB status indication
  • Includes a DC 12V 5A switching power adapter
  • Power supply with latch locking to the hub preventing from accidental disconnection
  • Overcurrent protection
  • Industrial-grade Superspeed USB 3.1 Gen. 1 over Ethernet device hub with SECC metal case for DIN rail mounting. Two mounting holes on bottom case
  • CE, FCC approval

Specifications

General
PortsDownstreamTwelve Type-A
UpstreamOne Type-B connector
LEDsPowerOne
Port StatusTwelve
Power ModeSelf-power mode
Output Voltage (per port)+5VDC
Output Current (per port)900mA maximum
Operating Temperature0°C to 45°C
Storage Temperature-20°C to 70°C
Humidity0 to 90% RH. Noncondensing
Safety ApprovalsCE, FCC
HousingMetal case
Weight400g
Dimensions155mm × 65mm × 53mm (W × L × H)
Input Power Range9Vdc ~ 30Vdc

Document

Product Manual

Private File - Access Forbidden
Private File - Access Forbidden
Private File - Access Forbidden
Private File - Access Forbidden

USB server Help file for linux Web version

Private File - Access Forbidden

Software

The USB Server software integrates both Server and Client functionality into one app with clear and simple interface. You need to install the program on the Server, the local PC where the USB over Ethernet Hub is physically connected. Start the “Server” tab to share USB devices.

On the Clients, where all the remote client computers needing to connect to the shared USB devices, install the app and start the “Client” tab to access and use shared USB devices over network.

For Windows:

CMD commands for Windows:
Example : 
USB_server.exe  -h
USB_server.exe --show-usb-list
USB_server.exe --share-usb-port=1:1 --tcp=12345

Icon

USB Device Server Setup For Windows 1.8.0.0

1 file(s) 5.32 MB
Download

For Linux:

Please note: USB Server for Linux requires kernel version from 2.6.18 up to 4.4

Private File - Access ForbiddenPrivate File - Access ForbiddenPrivate File - Access ForbiddenPrivate File - Access Forbidden

For kernel 5.0
Private File - Access Forbidden
Private File - Access Forbidden
For Ubuntu 20.04 – 22.04

Private File - Access Forbidden

For Raspberry Pi Debian Bullseye 64bit

Private File - Access Forbidden

For MACOS

Private File - Access ForbiddenPrivate File - Access Forbidden

If after installation, the following message is displayed.

“USB-server is damaged and can’t be opened”

A Mac will sometimes encounter a file it doesn’t trust and report that the file is damaged, and should be moved to the Trash. MacOS has quarantined the app since it suspects foul play.

Assuming you trust the origin of the app that you have downloaded (for example, a piece of software directly from a developer you trust) you can attempt to ignore the warning and open the file anyway.

To do this, open a new Terminal window and type (or paste the following command):

Open Terminal

On your Mac, do one of the following:

  • Click the Launchpad icon  in the Dock, type Terminal in the search field, then click Terminal.
  • In the Finder  , open the /Applications/Utilities folder, then double-click Terminal.
Command
xattr -d com.apple.quarantine /Applications/USB_server.app

FAQ

Q1: USB server application get error with Microsoft Hyper-V

Answer: Please update the application to version 1.2.

Q2: What to do when USB server USB over Ethernet Server can’t connect?

Answer: You can try to reset the factory settings of the hardware. Please refer to the manual for instructions.

Related Products