UCAN-1211 / UCAN-1221

UCAN-1211 : 1-Port USB to CAN FD Adapter

UCAN-1221 : 1-Port USB to CAN FD ISO Adapter

Send Enquiry

Categories: CAN Bus Adapters, USB TO CAN FD Tags: CAN, Plastic, USB

Description

The USB to CAN FD Adapter is designed to add CAN/CAN FD (Controller Area Network Flexible Data Rate) interface to PCs or notebooks with high speed CAN channels via USB connection. The USB to CAN FD interface provides simple and quick connection to CAN and CAN FD networks. Supporting CAN FD frames for both ISO and Bosch’s Non-ISO standards, the Adapter transmits and receives both CAN frames in the classical CAN 2.0 A/B format as well as CAN FD format. Being capable to switch to faster or slower data rate dynamically, the CAN FD Adapter contains more data capacity in a frame up to 64 bytes. This USB to CAN FD Adapter can be added flexibly to existing CAN networks. Since CAN FD is an extension to the original CAN bus protocol, the Adapter is backward compatible with the CAN 2.0 A/B standards. This cost-effective USB to Dual CAN FD Adapter solution makes it easier than ever to enable CAN network connection to CAN FD with data rate up to 8 Mbps to your system.

Additional information

UCAN-1211	1-Port USB to CAN FD Adapter
UCAN-1221	1-Port USB to CAN FD ISO Adapter, Isolation Protection

Features

Adds one high speed CAN FD interfaces via USB connection
10-pin terminal block connector for connecting to one CAN interface
Meets the requirements of the ISO 11898-2:2016 high speed CAN specification
Complies to CAN specifications ISO 11898-1 for CAN and CAN FD
CAN FD support both ISO-11898-1:2015 and Bosch M_CAN revision 3.2.1.1
Supports CAN FD data rate up to 8 Mbps
Supports CAN bus speed up to 1 Mbps
Supplies CAN Bitrate Calculator utility for easy checking of supported bit rates
Non-standard baud rates supported
Supports CAN bus message filter configuration
CAN FD port can provide selectable DC +5V 100mA power output through pin-4 (1st-channel) of terminal block for external CAN devices requiring power.
Supports CAN 2.0A and CAN 2.0B protocols
Supported CAN modes
- Normal mode: normal operation on CAN bus
- Listen mode: passive receiving of CAN frames
- Loopback mode: transmitter also receives sent frames (for testing purposes)
Built-in 120 Ohm termination resistors for CAN bus termination
Firmware upgradable for future firmware revisions
Galvanic isolation between PC and CAN bus connection up to 5700 Vrms (available on UCAN-1221 & UCAN-1221: USB to CAN FD ISO Adapter)
CAN/CAN FD interface can be controlled over COM port using simple ASCII commands
Monitor LEDs indicating CAN initialization and CAN bus status of error & data
Powered by USB port; no external power adapter required
Includes one USB A/B cable. Cable length: 90 cm
Drivers provided for Windows 7 up to Windows 11, Windows Server, and Linux OS
Supports Linux SocketCAN (SLCAN)
Provides CanFestival drivers
Supported by CANHacker to test and analyze CAN frames
Supports BUSMASTER drivers
Supplies TITAN CAN FD/CAN test utility for testing and analyzing CAN/CAN FD ports
API library of C/C++, C#, VB6, VB.NET, Python and LabVIEW provided for user development of applications
Compact and robust ABS plastic enclosure with ventilation design suitable for harsh environment

Specifications

General
USB Bus	USB 2.0 high speed 480 Mbps USB 3.0, USB 2.0, USB 1.1 compatible
CAN Bus	Supports CAN 2.0A and CAN 2.0B and CAN FD
CAN Controller	TCAN4551-Q1
CAN Signals	CAN_H, CAN_L, CAN_GND, CAN_V+
CAN Bus Speed	up to 1 Mbits for CAN data transmit & receive up to 8 Mbits for CAN FD transmit & receive Non-standard baud rate supported
CAN Bus Mode	Normal mode: normal operation on CAN bus ListenOnly mode: passive receiving of CAN frames Loopback mode: transmitter also receives sent frames (for testing purposes)
Specification	ISO 11898-2 high speed CAN specification CAN FD support ISO-11898-1:2015 and Bosch M_CAN revision 3.2.1.1
Plug & Play	Supported
IRQ &IO Address	Assigned by system

UCAN-1211
Number of Ports	1
Connector	10-pin terminal block connector
Termination	120 Ohm terminator resistor on board
LED	Power, CAN bus data activity, CAN bus error
Protection	+/-12 KV ESD protection for CAN signals

UCAN-1221
Number of Ports	1
Connector	10-pin terminal block connector
Termination	120 Ohm terminator resistor on board
LED	Power, CAN bus data activity, CAN bus error
Isolation Protection	Power: 3000 VDC CAN bus: 5700 Vrms for CAN signals

Software Features
API Library	Supports C/C++, C#, Python, VB6, VB.NET and LabVIEW, Linux
Utility	On-board Firmware Update utility CAN Bitrate Calculator utility
O.S Driver Support	Windows 7 to Windows 11 OS Windows Server 2008 R2 to 2019 Linux
Monitoring Tools	Titan CAN test program, TITAN_CAN_FD_Utility Supported by CANHacker Busmaster supported

Power Requirement
Power Input	Power supplied via USB (5V) connector No external power needed
Power Consumption	Max. 150mA@5VDC (UCAN-1211) Max. 250mA@5VDC (UCAN-1221)

Mechanical
Casing	ABS Plastic enclosure with built-in DIN Rail brackets Two T-shaped slots on the bottom for wall mounting
Dimensions	100 mm x 73 mm x 30 mm (L x W x H) 100mm X 91mm X30mm with ears (L x W x H)
Weight	100g

Document

Product Manual

UCAN-1211 / UCAN-1221 Manual

1 file(s) 2.59 MB

Download

Software

USB to CAN FD Driver

TITAN_CDC_Driver.exe

1 file(s) 1.90 MB

Download

TITAN CAN C/C++ DLL

TITAN’s CAN application programming interface (API) is written in C/C++ and compiled into a DLL file. This DLL allows users to easily create programs to control our CAN products using simple, easy to understand functions. It uses the stdcall calling convention, allowing a large number of high-level languages to import the DLL without incompability problems.