Description
AnyplaceUSB-S4 USB over IP server supports four USB 2.0 port. The server is featured with USB over network sharing functionality. The USB device inserted to this USB over IP server can be shared and accessed by network computers over wired or wireless network from anyplace in the world. The USB over IP server, when used in conjunction with TITAN’s AnyplaceUSB software, enables USB remote connection. The app makes the USB port available to be accessed, shared and used over IP, LAN, WAN, VLAN, VPN and the Internet from any remote locations.
In case you need to forward a USB device or would like to access a remote USB device from a virtual machine, this task can be easily accomplished with AnyplaceUSB software. Just by installing the software onto the host machine and client, you can share USB over Ethernet and access the device in the virtual session.
Software
AnyplaceUSB-S2/S4 Firmware
The AnyplaceUSB software integrates both Server and Client functionality into one app with clear and simple interface. You need to install the program on the Server, the local PC where the USB over Ethernet Hub is physically connected. Start the “Server” tab to share USB devices.
On the Clients, where all the remote client computers needing to connect to the shared USB devices, install the app and start the “Client” tab to access and use shared USB devices over network.
For Windows:
CMD commands for Windows:
Example :
AnyplaceUSB.exe -h
AnyplaceUSB.exe --show-usb-list
AnyplaceUSB.exe --share-usb-port=1:1 --tcp=12345
For Linux:
Please note: AnyplaceUSB for Linux requires kernel version from 2.6.18 up to 4.4
For kernel 5.0
For MACOS
If after installation, the following message is displayed.
A Mac will sometimes encounter a file it doesn’t trust and report that the file is damaged, and should be moved to the Trash. MacOS has quarantined the app since it suspects foul play.
Assuming you trust the origin of the app that you have downloaded (for example, a piece of software directly from a developer you trust) you can attempt to ignore the warning and open the file anyway.
To do this, open a new Terminal window and type (or paste the following command):
Open Terminal
On your Mac, do one of the following:
- Click the Launchpad icon
in the Dock, type Terminal in the search field, then click Terminal. - In the Finder , open the /Applications/Utilities folder, then double-click Terminal.
Command
xattr -d com.apple.quarantine /Applications/AnyplaceUSB.app
FAQ
Q1: AnyplaceUSB application get error with Microsoft Hyper-V
Answer: Please update the application to version 1.2.
Q2: What to do when AnyplaceUSB USB over Ethernet Server can’t connect?
Answer: You can try to reset the factory settings of the hardware. Please refer to the manual for instructions.
in the Dock, type Terminal in the search field, then click Terminal.
